An Evaluation of Extra Sensory Perception free essay sample

This paper evaluates the paranormal phenomena of people being able to read minds or as it is more scientific called: Extra sensory perception (ESP), precognition, controlled remote viewing and anomalous cognition. This paper states that, to date, parapsychology research has only been able to demonstrate the likelihood of the ability to read minds. The author reviews the SCAI experiments but believes that science has not been able to explain clearly and definitively the phenomena. He concludes that currently science believes the probability of people being able to read minds is low though evidence in the future may indicate otherwise. Recent premises for the above claim by parapsychologists are the results of the ganzfeld, the random-number generator, and the famous SRI and SAIC experiments. Prima facie, it would appear that there is a great deal of empirical evidence to indicate that mind reading can and does happen. However, a closer look will reveal that all the cited examples of scientifically approached experiments suffered from certain limitations. We will write a custom essay sample on An Evaluation of Extra Sensory Perception or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page The SAIC experiments on anomalous mental phenomena have been acknowledged by a large body of respected scientists to be methodologically and statistically superior to the earlier SRI research as well as to previous parapsychological studies, since they avoided all the major flaws such as non-independent trials and the problems of multiple statistical testing that was characteristic of much of the previous work.

Delivering Employability Skills Essay Example

Delivering Employability Skills Essay Example Delivering Employability Skills Essay Delivering Employability Skills Essay Explain and justify the need to continually update your own knowledge and skills to reflect the changing sector and job market requirements. (6. 1) Part 3: Describe and evaluate a range of appropriate creative and constructive feedback techniques that underpin persuasive employability skills training (2. 2, 2. 3). (Write apron. 000 1500 words) Assignment guidance Part 1: You should include a definition of employability skills and give some examples, such as communication and interpersonal skills; problem solving kills; using own initiative and being self-motivated; working under pressure and to deadlines; organizational skills; team working; ability to learn and adapt; innumeracy; valuing diversity and difference; negotiation skills. You could contrast these with employment skills, giving a definition and some relevant examples such as, what makes effective C.v.; effective applications; forms and supporting letters; interview techniques; relevant experience. What do you think might be the advantages and disadvantages of each of these two types of training given the current economic situation? Part 2: Next you need to talk about the different skills a teacher needs to enable them to deliver employability effectively, such as knowledge and understanding of different employability skills; active listening; questioning skills; building rapport; giving clear and constructive feedback and showing empathy. What skills and personal qualities do you think you have that would help you to deliver employability as part Of your specialist area? For example, consistency, diplomacy, efficiency, enthusiasm, flexibility, honesty, ability to lead and titivated, observant, patience, persistence, responsiveness, sincerity. Why might they be useful? What competencies do you think you have? For example, effective planning and preparation, ability to set SMART targets, ability to use a range of teaching and learning methods, resources and assessment activities to engage and motivate learners, ability to monitor and record progress towards identified targets, ability to evaluate own delivery and identify areas for improvement. Continuing Professional Development (CAP) is a vital part of delivering employability skills in any vocational area. Discuss why it is so important to ensure that you keep up with changes in policy, practice and legislation.

Sources of Mali Crisis and Causes of Military Intervention Research Paper

Sources of Mali Crisis and Causes of Military Intervention - Research Paper Example Most of them were serving in the Gaddafi army and as such carried alongside with them an assortment of arms. Also, since they had just returned from a revolutionary war in Libya, these returnees were still motivated by their combative instincts to propagate the same war in Mali3. The Malian government, as well as the military, was caught unawares by the events. Their army was too weak and incapacitated to contain the insurgents. That aside, a large group of foreign Arab fighters, who are also linked to Al Qaeda, were infiltrating Mali at the same time. It is this unfolding that supposedly inspired United States and France to push for regional military intervention in Mali through the UN Security Council. The extremist groups in Mali operating in Mali are regarded as outright threats to the security of the entire world. There are three major armed Islamist groups operating in the northern Mali. They include AQIM, Ansar al Dine, and MUJAO. The origin of AQIM is traced back to the 1990s civil conflict in the nearby state of Algeria. As per now, this group has been in existence in the northern Mali for close to a decade. It is linked with the numerous and constant attacks and kidnapping of Westerners. They do this mainly in a bid to demand for ransom for their release. In 2007, AQIM is linked with the bombing that wrecked Algeria, which also included an attack on U.N. office in Algeria’s capital Algiers. The leader of AQIM, Abdelmalek Droukdel, remains widely at large although there are reports indicating that he could be cased somewhere in Timbuktu. This group has been among United States designated Foreign Terrorist Organization for close to a decade now4.... That aside, a large group of foreign Arab fighters, who are also linked to Al Qaeda, were infiltrating Mali at the same time. It is this unfolding that supposedly inspired the United States and France to push for regional military intervention in Mali through the UN Security Council. The extremist groups in Mali operating in Mali are regarded as outright threats to the security of the entire world. There are three major armed Islamist groups operating in the northern Mali. They include AQIM, Ansar al Dine, and MUJAO. The origin of AQIM is traced back to the 1990s civil conflict in the nearby state of Algeria. As per now, this group has been in existence in the northern Mali for close to a decade. It is linked with the numerous and constant attacks and kidnapping of Westerners. They do this mainly in a bid to demand ransom for their release. In 2007, AQIM is linked with the bombing that wrecked Algeria, which also included an attack on U.N. office in Algeria’s capital Algiers. The leader of AQIM, Abdelmalek Droukdel, remains widely at large although there are reports indicating that he could be cased somewhere in Timbuktu. This group has been among the United States designated Foreign Terrorist Organization for close to a decade now. The other group is the MUJWA whose emergence is traced to in the latter parts of 2011. It was born as a splinter faction of Al Qaeda in the Islamic Maghreb and is also reported to be engaged in kidnappings and terrorist attacks in the region.

The Case of Cross-Border Chemicals Study Example | Topics and Well Written Essays - 250 words

The of Cross-Border Chemicals - Case Study Example g weakness in the NAIOS treaty, and so the governments of Rantania, Aldor, and Pell put forward drafting a regional treaty on vital environmental concerns in this meeting. The biggest environmental issues involve pollution, protection of the endangered Red Crane, health and environmental effects of TCP, and food security. The issues are spread across all the states, with each state being affected with one or more of the issues. However, it is expected that all the issues will be resolved upon drafting and implementing the regional environmental treaty Firstly, the treaty will develop mechanisms and parameters that will define the boundaries that must not be crossed when it comes to these environmental issues. For instance, the use of TCP is beneficial to farmers because it increases yield, but excessive use will be curbed as much as possible. The treaty will define the boundaries and limits which when breached will call for appropriate action against the violators. Secondly, the treaty will define the course of action to be followed whenever the treaty’s terms are violated. For instance, what kind of measures will be taken against violators, and the procedures involved in adopting such measures. Finally, the treaty will define and explicitly state how future environmental issues will be addressed. It is important to note that this treaty is intended to solve current and future issues, and therefore will be dynamic and

Circuit Protection and Utilisation of Electricity

Circuit Protection and Utilisation of Electricity Task 1 With the aid of suitable diagrams, describe in detail, the construction and operating principles of the following circuit breakers. Include in your description the advantages and disadvantages of each a) Oil circuit breaker An oil circuit breaker or OCB is a type of device which uses different kinds of oils as insulating materials/dielectrics in order to reduce the arc when activated. The circuit breaker will have two contacts that are forced to separate while being submersed in oil, the oil is there to evaporate any heat produced by the arc when the breaker is tripped. An OCB is made up of a metal tank to contain the oil and contacts, contacts for carrying the current and the oil which is the insulating material that stops an arc occurring. The operation of this type of breaker is simple, the contacts start off in the closed position so that the circuit is complete and when a fault occurs the contacts are then forced apart causing an arc to form. Sometimes an arc can emit heat which can damage the circuit and machinery, this is why we use the oil to evaporate the heat. The oil will be turned into gas(hydrogen) and then slowly displace any oil left, the arc will be extinguished when the contacts move fa r away from each other. The OCB contacts can sometimes get burnt when arcing has occurred and carbon can form in the area around the contacts. The carbon makes the oil lose dielectric strength and therefore means that the circuit breaker is less effective at breaking the current. The OCB needs to be drained and refilled when it has tripped, also the contacts need to be closely inspected for burning or carbon build up. There are two types of oil circuit breaker: Bulk Oil- This is a circuit breaker that requires larger amounts of oil so that the arc can be extinguished. These circuit breakers can also be known as dead tank'(Circuit globe, 2016) because the tank is positioned at ground potential. If the voltage is higher then more oil will be required as the arc will be stronger and harder to extinguish. Another use of this circuit breaker is to insulate all live parts in the breaker from the earth. Minimum Oil- This circuit breaker aims to use the minimum required oil that is possible, instead of extinguishing the arc completely using oil it also uses porcelain. The porcelain insulates the circuit breaker live parts from the earth. The chamber of the breaker is lined with bakelised (Circuit globe, 2016) paper, this paper has good mechanical and electrical properties. The tube moves vertically in order to break contact, when the contacts start to separate then oil is forced into the cylinder to reduce arcing. The advantages of OCBs: Due to the oil having a high dielectric strength'(Circuit globe, 2016) it can be used as insulation once the arc has been dealt with. The hydrogen produced due to the evaporation of the oil is good for cooling the device and diffusing. The oil creates a clearing in the conductors and the earth components. The disadvantages of OCBs: The oil is flammable which means that fires are able to be started with it. The oils dielectric strength decreases due to the carbon particles that pollute it. Since the tank isnt always air tight this leaves room for dangerous mixture of air which could result in explosive substances being created. -If the tank needed is large then it can be expensive. b) Vacuum interrupter A vacuum circuit breaker or VCB is a type of circuit breaker that uses a vacuum to extinguish the arc. This works best on weaker voltages, as higher voltages will be too strong to extinguish. The breaker can be made of steel and consists of a chamber which is the vacuum interrupter, the material for the contacts needs to be perfect as otherwise there wont be an effective connection. The application of this type of circuit breaker is to switch HV devices, they are as effective as SF6 breakers which have a big chance of leakage. The reason it is better than other circuit breakers is because when the contacts separate inside the vacuum they have a greater dielectric strength which builds up so that it is thousands of times higher than normal circuit breakers. Advantages to a VCB: Since there isnt any material or substance inside the chamber theres no risk of fire They have a good service life as they have minimal parts Due to the fact that it doesnt use harmful gases or substances it is safer for people to work on and for the environment. The replacement and maintenance is much easier. they can be used repeatedly. There are no gases inside which means that there is no room for gas emission leakage. Disadvantages to a VCB: when the vacuum has been damaged, failed to extinguish the arc or loses the vacuum it cant be repaired on site. This is due to the complex design and conditions that it needs to be fixed. the vacuum interrupter will need surge suppressors (Hub pages, January 2 2014) that are in parallel with the phase interrupters with low currents. they are uneconomical if only small quantities are being made c) HRC liquid fuse A HRC liquid fuse is a high voltage fuse which have a relatively high current rating and breaking capacity. This means that the fuse can be used in some high voltage applications, high voltage fuses need specific designs so that they can handle it without breaking. There are two types of HRC fuse: Liquid type HV HRC fuse: This type of fuse is filled with a fluid called Carbon tetrachloride (Circuit globe, 2016) and they can be used for a large number of high voltage applications. They can protect circuits that have a 400 A rating or higher, their breaking capacity is around 6100 A when used on a circuit with a 33KV supply. This fuse is made up of a glass tubing filled with the above fluid and it has brass caps on either end. There is also a fuse link which gets fixed to one of the caps and then the other end is attached to a bronze spiral fixed onto the other cap. When the limit of current is exceeded then the fuse link will be blown, this will retract the spring so that it hits a liquid detector. When the arc is created and extinguished a small quantity of gas will be produced, fuses arent normally used as the first protective method for a circuit. The circuit will have other circuit breakers, if the circuit breakers fail then the fuse will blow. Advantages: cheaper than other circuit protecting devices -Maintenance is not required Is able to be used in high and low voltage applications The operation/breaking of the fuse is automatic Disadvantages: the fuse needs be rewired or replaced when blown the fuse can sometimes have tripping time issues when dealing with different voltages. Cartridge type HV HRC fuse: This type of fuse is very similar to low voltage fuses however there is a specific component that makes it effective at extinguishing high voltage arcs. The only difference in the design I that the wire is wound into a ring shape so that the corona effect can be avoided, the corona effect is the ionization of a fluid surrounding a conductor that is electrically charged (wiki user, 2016). some applications may require two fuses to be put in parallel, one of them will have a low resistance and the other a high resistance so that the low resistance will blow first and slightly reduce the stress on the circuit when it breaks. This type of fuse can be used up to 33kv as they have a breaking capacity of about 8,760 A. Advantages: They dont deteriorate over time They have a high speed of operation No maintenance is required It is cheaper than other methods They can be used for both high and low voltage applications Disadvantages: After it has blown it must be replaced when an arc occurs it produces heat energy which means that it is a fire hazard and can damage some of the components inside d) HRC expulsion fuse This type of fuse uses gases produced by the arc and its lining to extinguish the arc, it also is vented to let the gas out. The fuse link can be surrounded by liquid which turn into gas such as boric acid (Wiki User, 2016) when the fuse is blown the heat from the arc will make the boric acid change into gas. The gas will then quickly extinguish the arc, the gas also will explosively burst out the ends of the fuse and this is the reason they must only be used outside. There is usually a type of pin so that you can manually blow all three phases in case only one had gone. This fuse can be used with very high amperage as well as low voltage. Advantages: No maintenance is required Cheaper than other types of circuit breaker Simple installation Disadvantages: Can be dangerous when blown as there is an explosive part in the process Damage to other devices may occur if they are in close vicinity to the fuse at time of breaking Needs to be replaced and repaired when blown Task 2 Produce suitably labelled diagrams and produce a detailed explanation of the principles of operation of an inverse definite minimum time relay. An inverse definite minimum time relay AKA IDMT relay is a circuit protection device that consists of an upper electromagnet which has two windings, There is a primary and a secondary. The primary winding is attached to the current transformer that is on the line that is in need of protection and has eight tappings. The tappings are connected to a plug which sets the bridge by the number of turns that will be used, the settings then can be adjusted so that required current setting can be achieved. The secondary winding is then energized by the induction effect and is wound over the limb in the middle of the upper electromagnet, it also spreads over the limbs of the lower electromagnet. There is a disc which has flux leakages, the flux leakage comes from the upper electro magnet and it is in phase with a disc on the lower electromagnet. Te disc has a spindle which has a moving contact that connects two of the fixed contacts when it has rotated into a certain position. The setting of t his position or angle varies, it can vary from 0 to 360. This device operates during overload conditions, when over current occurs this device will protect the circuit from any damage that may be caused. An 11 kV three phase system develops a 159 MVA line to line short circuit. The system is protected by a scheme using 500/1 ratio Current Transformer rated at 5 A and IDMT relays. Determine the operating time for the relays if the time multipliers were set to 0.45 s and the plug setting was 120 %. IDMT relay current characteristic curve Task 3 Describe with the aid of diagrams the importance of properly earthing equipment. With the aid of diagrams describe the following methods of earth fault protection: Earth fault relay. Residual current device. Use examples of earth fault protection at your place of work. a) There are many risks within my workplace however one of the main risks is electricity, it is very important that I am protected from this risk as it can cause severe injury or fatality. To ground something means to attach a path for the electrical current to return to the ground safely. This will stop the current using us as paths, when a short circuit occurs the current will find the easiest way back to the ground. There are a few main reasons for grounding all electrical equipment: Prevent Damage to equipment, injury or death This is the most important reason in my opinion as it will literally protect our lives. The most important aspect to work is safety which means making all equipment safe for use, we do this by earthing it and doing PAT testing. PAT testing (Portable appliance testing) is in place to make sure that the equipment works and will not hurt or damage itself/others. Electricity is very dangerous and can arc if not earthed or correctly encased, it can cause death and injuries which could affect the rest of someones life. Electrical overload protection this means that it will protect us from any surges that may occur, this could be a surge in current or perhaps a lightning strike. If the equipment is earthed then the surge will go straight into the ground, if however it isnt then it would go into whatever was in contact with the equipment. Direction of electricity- The electricity will have a clear, safe path to the ground which means it is much safer for people to use the equipment. The current will be able to move safely and efficiently throughout the system without risk of hurting or damaging the circuit/person using it. Stabilization of voltage levels Grounding also makes sure that all the currents and power are distributed around the circuit to their proper places. This means that there is little room for over current and the circuit being broken, it provides a reference point for the voltage sources in the circuit system. The earth is the best conductor the earth is a very good conductor, the electricity which is trying to get to earth will also take the route with the least resistance. This is why we are perfect for connecting the appliance to the earth, grounding the system will give the electricity a better path. Grounding can be done individually at peoples houses by use of a metal rod or extendable metal pipe that runs into the house from the underground water supply. There are different types of Earthing/Grounding: Plate type- this is a method where a small metal plate is buried no more than 3 meters below the housing, it is connected to piping which is then connected to the houses service panel. Pipe type- the pipe or rod will have a set of terminals that copper conductors can connect to, the copper conductors then will be put into the service panel for the house, this would ground the houses electrical appliances. Strip/Wire Earthing- These are used between casings of metal equipment to earth/ground the device or machinery. It can be attached from the casing to another piece of metal that goes into the ground. b) i) Earth Fault Relay A relay is a device that is able to detect unordinary conditions within the system, it enables the correct circuit breakers to trip when over current is detected. Most relays operate with the induction principle, this means that when the relay operates its contacts are closed in the circuit and the passage of current within the coil in the trip circuit activates a plunger. The plunger then will activate the appropriate circuit breaker to trip, this means that the area of fault in the system is disconnected safely. This type of relay is basically there to trip the circuit breaker if there is a fault with the earthing pathway, this could be damaged cable or a build up in resistance causing excessive current. The induction principle consists of moving parts such as an aluminium disc fixed onto a shaft and this rotates on two bearings between the poles of an electromagnet and damping magnet. The electromagnet gets wound and has seven taps. The seven taps are on the front of the panel, th e tap that is required can be chosen by pushing in the plug. There is a setting called the pick-up current which can be varied via the use of a plug multiplier. The pick-up current values of earth fault relays are normally quite low. ii) Residual current device- A residual current device AKA an RCD is an electrical device that breaks a circuit when it senses that the current is unbalanced or overloaded between the line and neutral conductors. These devices are more effective at keeping the operator safe than fuses and circuit breakers are, they will prevent fatalities if someone were to touch a live part. They do this as they are highly sensitive and will switch off electrically if there is any fault. They make sure that the circuit is switched off if it detects electricity flowing down a wrong path, this could be caused by a cut or damaged wire coming into contact with something other than the severed cable. There are a few types of RCDs: Fixed- This device is used in consumer units and will protect a group of circuits or individual ones if that is what is required. It will protect anything in the circuit including any appliances attached to the circuit, the fixed RCD will offer a very quick protection from fatality or severe injury. Portable- This device is able to be plugged into the socket and will protect the equipment, lead and person touching the equipment. However it wont protect the whole circuit, if someone were to touch another part of the circuit they may still get electrocuted. Socket-outlet- This is basically a socket with a built in RCD, it can be used as a regular socket would be. It doesnt protect the whole circuit, it will protect the equipment plugged in and the leads, as well as the person touching the equipment. References: Circuit globe (2016) Oil Circuit Breaker [online] Available: http://circuitglobe.com/oil-circuit-breaker.html [Accessed: 21/12/2016] http://hubpages.com/technology/Vacuum-Circuit-Breakers-Advantages-Disadvantages https://en.wikipedia.org/wiki/Corona_discharge https://www.mepits.com/tutorial/472/Electrical/Electric-Fuse http://www.cooperindustries.com/content/dam/public/bussmann/Electrical/Resources/solution-center/technical_library/BUS_Ele_Tech_Lib_Fuses_E_Rated.pdf http://www.platinumelectricians.com.au/blog/importance-grounding-electrical-currents/ http://www.electricaltechnology.org/2015/05/earthing-and-electrical-grounding-types-of-earthing.html http://www.allinterview.com/showanswers/90014/what-is-idmt-relay-how-it-works.html http://cindulkar.tripod.com/lab13.pdf https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi9OrS524Sm306mYRxGTx2nPTdirF-fc_b47QftwcD-UqhSrioE1VqP_uwZiRXqnC1i0zwi3mp5kpuBdiQKwNZTD2MYNmHji2-X0ggSvV9ruGG2D0PZFZkWsGHFgJ31_bV1mhzG_inWAJv4/s1600/power+system+protection+13.png http://www.itmikro.com/app/webroot/UploadedContent/images/pro_3_1.png http://www.electricalsafetyfirst.org.uk/guides-and-advice/electrical-items/rcds-explained/

General Environment Analysis for Hsbc in Mainland China Essay

Economy -We know the high speed of China’s growing economy. With the development of the economy in China, Chinese customers’ consumption power has been going up. More people are accepting the consumption ways such as credit card and installment plan. -Not only individuals, small and medium sized enterprises play significant roles in China’s economy. Since China’s reform and open-door policy, huge amount of small and medium sized enterprises come out. They demand capital and it is relatively harder for them to get it so they rely more on banks. Demography Middle Class in China is growing and they own stronger purchase ability and at the same time they got the sense of investment. Political/ Legal Since entering the WTO and in December 2006, China formally opened the banking industry to the world, which means that foreign banks are able to conduct RMB business in China. However, every move of the foreign banks are regulated by the China Banking Regulatory Commission. For example, the loan-to-deposit ratio must be strictly controlled within 75%. Therefore, how to satisfy this number and how to deal with the numerator and denominator are what HSBC needs to take into consideration. Technological The development of Internet has led to the prosperity of e-commerce. HSBC might consider cooperating with such related companies like some online stores and payment platforms to expand the retail business. Global The destruction of the financial crisis on the global economy had in particular impact on the parent bank of HSBC, and this has inevitably affected the subsidiaries in China. Sociocultural Traditionally, Chinese people prefer saving than investing. As for investment, people prefer low-risk financial products. Low-risk with high-return investment products will be the one kind people pursue.

Stonewall Riots of 1969

Introduction The stonewall riots of 1969 happened consecutively for 3 days, it all started on June 27th in Greenwich Village, New York at the Stonewall Inn. During the 1960’s it was common for the police to raid gay bars, and when this would happen the gays and lesbians would try to sneak out the back door. The police would arrest the patrons and drag them off to jail, their names were written down and published in the newspaper by the next day and as a result they would be fired from their jobs. â€Å"The 1960s was a time of revolution.The Civil Rights Movement was in full swing and people took to the streets to protest the war in Vietnam. It was only a matter of time before gays and lesbians stood up for their rights as well. †(A history of Gay and Lesbian Pride) June is now the month known as Gay Pride month, a time when all gays and lesbians prance and parade to celebrate. Setting/Background Living in the 1960’s as a gay and or lesbian was very difficult in f act the only way to be safe was to be â€Å"in the closet†, not openly gay to the public.Police took it up as their duty to arrest gay patrons who were seen kissing each other, dancing with one another, or even holding hands with one another. â€Å"Generally just being present was enough in their minds to warrant an arrest. Of course when this appeared in the newspaper they were tabbed as having committed a Crime against nature. †(The history and impact of the Stonewall Riots) Issues Involved/Causes During the 1950’s – 1990’s gay couples were not allowed to touch or dance with one another; it was also illegal for women to dress up in men’s clothing and men to dress in women’s clothing.If three known homosexuals were sitting at a table together then it would be illegal to serve an alcoholic beverage to them. â€Å"If the gay’s didn’t comply with the laws then they were faced with a fine, a night in jail, and the next mor ning they would have their names printed the daily newspapers and have a record under criminal activity†. (The history and impact of the Stonewall Riots) Event On June 27th police raided a gay bar in Greenwich, New York at the Stonewall Inn.Police demanded identification papers from costumers, they escorted them outside on to the sidewalks were they were pushed off and others were put into a paddy-wagon. That’s when some of the lesbians and gays started to fight back. They Chanted â€Å"Gay Power† all while throwing bottles and rocks at the police. â€Å"Riot veteran and gay rights activist Craig Rodwell says: â€Å"A number of incidents were happening simultaneously. There was no one thing that happened or one person, there was just†¦ a flash of group, of mass anger. (The stonewall riots-1969) Crowds soon began to grow outside the Stonewall Inn. Every time the police would have the crowd spilt up it would just start again right behind them and again they would start to chant. Thirteen arrest had been made on the first night of the riot many of the protesters were singled out and beaten and then later were arrested. With about two thousand protesters and only about four hundred police officers, the tactical patrol force was called in to disperse the riots but with a failed attempt the riot continued on.Outcome/Effects/Aftermath Effects of the Stonewall Riots were that the gay community in new York united in the fight against discrimination and June became known as a gay month to celebrate their pride in homosexuality. The gay liberation front was organized. Gay people learned to take a stand for themselves and to fight back. Reflection Though gay issues are still a problem today in America, the Stonewall Riots was the first step toward uniting the gay community to start taking a stand for what they believe is right.I believe that if it wasn’t for the Stonewall Riots then life for gays and lesbians would still be the same as it was then. It was the Stonewall Riot that led to gay liberations and for the gay community to start working together to make life easier for them. I don’t believe that the police should have gone as far as they did with raiding gay bars, but it was there ridings that led up to the Stonewall Riot so actually I’m glad that they did that otherwise the gay liberation front may have never been formed.